SATO RACING Axle Caps 17mm(part# AXCAP17) attach to the rear axles on Honda CB300R, CBR300R, CBR500R and other compatible bike models with a 16-17mm axle diameter. These cup-style Axle Caps have a deep groove around the outside edge that can be used to lift the bike onto a compatible hook-type stand*. The standoff these Axle Caps provide should also help protect the wheel area from damage in a fallover or crash. Made of high strength billet aluminum with your choice of Black, Gold, Red or Green anodized finish, with white laser-etched 'Sato Racing' logo script around the outer edge. (L/R Set of 2)
Confirmed fitment:
Yamaha YZF R3 / MT-03 (Fits REAR only. For the FRONT axle, use 15mm Axle Caps part# AXCAP15)
Honda CBR300R / CB300R (CB250R) / CBR500R (Fits REAR only. Front axle on these models is also 17mm, but the Axle Cap will only fit the side with the nut, due to the head design of the axle.)
Not compatible with 17mm Kawasaki models such as Ninja 400 that use castle nuts with pins for the axles. (For Kawasaki, get part # AXCAP-K25018, which includes a compatible axle lock nut in the kit.)
* Fits stands with V-type hooks that have at least a 35mm opening and are a maximum of 5mm thick. NOTE: Axle cannot be pulled out when lifted up on the stand.
SATO RACING Axle Caps 17mm(part# AXCAP17) attach to the rear axles on Honda CB300R, CBR300R, CBR500R and other compatible bike models with a 16-17mm axle diameter. These cup-style Axle Caps have a deep groove around the outside edge that can be used to lift the bike onto a compatible hook-type stand*. The standoff these Axle Caps provide should also help protect the wheel area from damage in a fallover or crash. Made of high strength billet aluminum with your choice of Black, Gold, Red or Green anodized finish, with white laser-etched 'Sato Racing' logo script around the outer edge. (L/R Set of 2)
Confirmed fitment:
Yamaha YZF R3 / MT-03 (Fits REAR only. For the FRONT axle, use 15mm Axle Caps part# AXCAP15)
Honda CBR300R / CB300R (CB250R) / CBR500R (Fits REAR only. Front axle on these models is also 17mm, but the Axle Cap will only fit the side with the nut, due to the head design of the axle.)
Not compatible with 17mm Kawasaki models such as Ninja 400 that use castle nuts with pins for the axles. (For Kawasaki, get part # AXCAP-K25018, which includes a compatible axle lock nut in the kit.)
* Fits stands with V-type hooks that have at least a 35mm opening and are a maximum of 5mm thick. NOTE: Axle cannot be pulled out when lifted up on the stand.
