Lever Guard -Size M12-

SATO RACING Lever Guard is a racing part designed to protect your hands and prevent unintentional engagement of the brake or clutch lever, such as during contact with another rider on the track. It is often fitted to race bikes on the brake side only, but it can also be installed on the clutch side for a symmetrical appearance.

SATO RACING Lever Guard part# LG30-M12 is made of black anodized billet aluminum, and features a center pivot that can be adjusted to any angle for maximum compatibility. This also allows it to be installed on either the left side or right side. The base of the Lever Guard is 30mm diameter to match the diameter of SATO RACING standard-size Handle Bar Ends, such as SATO M12-size Bar Ends part# BE-BMW2 (seen in the sample photos above). It can also be installed with our full size 35mm-diameter M12 Bar Ends part# BE-M12125 (for Suzuki) or BE-M12175 (for BMW). If installed with our full-size Bar Ends, there will be a slight step-down from the Bar End to the Lever Guard due to the 5mm difference in overall diameter.

NOTE: Handle Bar Ends are sold separately and are not included in the price of the Lever Guard).

NOTE: This Lever Guard model is designed to be integrated with the spacers and other hardware included with the SATO RACING Bar End models listed above, and might not work well with stock bar ends or other aftermarket bar ends.

Lever Guard is sold individually. For a L/ R set, order Qty:2.